plesk panel Archives - CloudMinister

How to create subscription package in plesk panel

Here we discuss few step of how  to create subscription package in Plesk panel for you to understand in a better way:

Step: 1.  Login to the panel & the go to service plans & then click on Add plan

Step 2. Type the plan name first & then fulfill the the boxes of the plan i.e disk space in mb, bandwidth in mb, total mailboxes ,etc.

Step 3. And the finally click on OK & the package is created & see in the service plan list.

How to Send Mass Mail in Plesk panel?

1) Login to Plesk admin panel.

2) Click the icon Tools & settings.

3) Click the icon Mass Email Messages from Tools & Resources.

4) Click the icon Add Mass Email Template.

5) fill all the details and click OK button.

6) New mass email message template has been created.


How to Set Cron Job in Plesk panel?


Setting up a scheduled task or a Cron in Plesk panel is an important thing you should be looking for. There are numerous performance and accessibility benefits of adding up a Cron (scheduled task) in Plesk. In case you are not aware of the correct procedure of adding up the scheduled task, here is the detailed step-by-step guide to setting up a Cron Job in Plesk Panel

Guide to Creating a Cron Task in Plesk Panel 

Depending on the version of Plesk you are using, you may experience some differences in adding up Cron Job. However, the following guide can be extremely beneficial for you with some small design tweaks. Follow the procedure, and you will end up setting a Cron Job flawlessly.

Step 1: Log in to your Plesk account by entering the username and password

Step 2: Once logged in, you can navigate to the “Websites & Domains” panels to proceed further

Step 3:  Here, search for “Scheduled Tasks.” Click on it 

Step 4: Here, you can see the option like “Add Task,” “Refresh,” “Remove,” and “Settings.”

Setting Up Cron Job in Plesk Panel

Step 5: Click on “Add Task”

Step 6: Here, you can add a variety of tasks depending on your needs. 

Step 7: The four types of tasks that you can add here are “Command,” “Fetch a URL,” and “Run a PHP Script.”

Step 8: Click on the desired task type and then fill in all the tasks; you can also select an email id to get notifications about the job.  

Step 9: Once done, click on “OK” to add the Cron Task

After successfully setting up the Cron task, you will get a popup saying, “The Scheduled task/Cron was successfully updated.” In case, you still face any problem, one can get Plesk support to overcome it conveniently.

Setting Up Cron Job in Plesk Panel

Read More: Boost WordPress Website Performance in 20 Minutes


So, these were the detailed nine steps to create a new Scheduled task in Plesk. Even if you are not too fluent in working with Plesk and its interface, this simple guide can correctly help you schedule the tasks. So, try your hands on these steps and create a perfectly defined Cron in Plesk

How to Setup the Name Server in Plesk Panel?


Name servers are conventions over the web that is used for transmitting information. And it is essential to set it up to be ensured of proper working of the website. Here, in the article, we will discuss the simplest and most efficient way of setting up the name server in Plesk. If you were looking for defining the name server and are new to the Plesk Panel, this article will be a worthy read for you.

Guide to Setting up Name Server in Plesk Panel

Here’s the step-by-step guide that will help you set up the name server from scratch.

Step 1: The very first step is to log in to your Plesk account. Use your username and password to enter the Plesk panel and use the services. 

Step 2: Navigate to “Website & Domains.” Here, you can find various services and features related to the Websites, the best free SSL certificate, and their functionalities. 

Setting Up Name Servers in Plesk Panel


Read More: Setting Up Cron Job in Plesk Panel

Step 3: Under the “Website & Domains” section, search for the “Hosting & DNS.”

Step 4: Look for” DNS Settings” here. Under DNS Settings, you can find the on-screen DNS records and other settings related to the DNS.

These were the four-step guide that can help add the Name Servers. Try these steps and add up the required DNS norms.

Setting Up Name Servers in Plesk Panel

Final Verdict

These were the simplest and easy to use steps that you can use to set up the name server in the Plesk panel. Follow them as they are, and you can easily set up a new name server, even if you are not too aware of Plesk’s working. Along with adding up the further name server information, these four steps can also be used for updating the name servers’ information. Try them and explore how easy to use and to set up the name server in Plesk.

How to create SPF DKIM DMARC records on Plesk panel

Here today we shall create SPF DKIM DMARC records in Plesk panel. These records are very useful in mail services to secure from spamming, phishing and also use as two factor authentication.

Let’s start first with SPF record

Now the turn to create DMARC record  

Next have to create DKIM record and this record is created  when set up mail server settings in Plesk just one click or have to enable this option.

All mail service requirement records is create successfully.

How to set active session in Plesk panel

In this  task we  learn how to enable session in Plesk panel. This know as how much time any user can log on stay on panel when the selected time is over then session terminated automatically. Let’s start now  Tools & settings –> Active Plesk session 

In next step just click on session settings for new user session duration.

Here you can set any user session within hours or minutes as well.


How to enable php handler in Plesk panel

Today here we are go with different types of php handler in Plesk panel. php handlers are basically work how we can run fast or smoothly our web application on internet.

Let’s start today task Tools & settings –> php settings 

Here you can enable php handlers as your requirements.
Fast CGI application, FPM application



We successfully enable php handlers.

How to create remote backup in plesk panel

Today we set up backup in plesk panel. just click on websites & Domains –> backup manager  

In this window you have to set schedule for backup as your wish per day, week, month.

And save this configuration.

How to configure Nginx reverse proxy on Plesk?

What is Reverse Proxy?

A normal proxy server is an intermediary server that can forward requests from multiple clients to different server through the internet & it also working on behalf of clients by providing privacy content. Reverse Proxy is a proxy server that sits between internal applications & external clients & send client request to appropriate backend vps linux server & it provides good control to certify the smooth flow of network traffic between clients & server.

Nginx is an open-source, free, high-performance, reverse-proxy, IMAP/POP3 proxy server, etc & can improve the performance by serving static content & passing dynamic content requests to apache server.

The reasons to install Reverse proxy are:

  1. If you have a multiple servers then the reverse proxy can help to balance the load between servers & can also improve the performance.
  2. It provides a single point of contact for client & can concentrate on logging & reporting across multiple servers.
  3. The main reason for install is privacy.

The reasons to recommend Nginx are:

  1. It can help to increase the security
  2. It can help him to improve the performance.
  3. It can help him to balance the load between servers.
  4. It can help him to easily logging & auditing.
  5. It can encrypting the connection between client & reverse proxy with TLS.

Steps to Setup NGINX Reverse Proxy on Plesk Panel?

  1. Login the plesk panel & the after go to tools & settings & then click on Restricted mode setting.


2. After click on web server tab which was shown in image & then after scroll down & see the nginx setting..


3. After, deselect the “proxy mode” & then after add this content on “Additional Nginx Directives” & then click on apply.

location / {

            proxy_pass       http://server_IP:3000;

            proxy_redirect   off;

            proxy_set_header Host $host;

            proxy_set_header X-Real-IP $remote_addr;

            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

            proxy_set_header X-Forwarded-Host $server_name;


Note:- You can only change on Server_IP of 1st line & server_name of last line.

Get started with CloudMinister Today